11 Problems with iFamily Baby Monitors (Explained)

iFamily Baby Monitors are a relatively new product on the market, but they have quickly become one of the most popular baby monitors out there.

They offer several unique features that make them stand out from other products in their category.

However, while the iFamily Baby Monitor is certainly popular, it’s not without its problems.

Here are some of the biggest issues with this particular device that you should watch out for.

iFamily baby monitor

Inconcistant Camera Quality

The biggest complaint about the iFamily Baby Monitor is that it has poor camera quality.

The resolution on the monitor itself is quite low and many users have complained about its lack of clarity when it comes to viewing images on their smartphones or tablets.

You will have to get close to the camera in order to see what they are doing.

Late Notifications

Another problem with iFamily Baby Monitor is its notifications system.

This feature allows you to receive texts or emails when there are any changes in your child’s room (such as crying).

However, since the motion sensors on this monitor are outdated, it’s hard for it to detect movement — so even if your child cries, you might not receive an alert about it until hours later.

Another cause could be slow internet speeds.

Problems with Two-Way Talk

The two-way talk feature allows you to speak directly to your child through the monitor without having to go into the room where they are sleeping.

This can help calm them down and keep them from waking up when they hear someone else talking nearby.

However, it does not work well if there is any kind of background noise in the room where your child is sleeping — even just a bit of music playing softly can cause problems with this feature.

Muffled Audio Quality

The audio quality on the iFamily Baby Monitor is low and garbled at times, making it difficult to understand what your baby is saying. 

Additionally, the sound doesn’t travel well through walls and can sometimes drop out entirely if you move too far away from the receiver (which can also happen if there’s too much background noise).

Check also our article on problems with Jousecu baby monitors.

Can’t Connect to iPhone

If you’re an iPhone owner, you may find it difficult to connect the iFamily Baby Monitor to your device.

Some users report that they have no luck at all, while others say they can get the monitor to work on their iPhone but only after a lot of trial and error.

If you are having trouble connecting your iPhone to your iFamily Baby Monitor, here are some things that you can try:

  • Make sure that both devices are connected to the same Wi-Fi network. If they are not, then you won’t be able to connect them together.
  • In addition, make sure that both devices have an active internet connection. If one device does not have an active internet connection, then it will not be able to connect with the other device either.
  • Make sure that your iPhone is updated with the latest version of iOS software available on Apple’s website.

Poor Battery Life

The battery life on this product isn’t very good either.

You’ll need to charge it every few hours if you want it to last through the night without running out of power completely.

The manufacturer claims that you can get up to 8 hours of battery life on one charge, but most consumers report getting less than 6 hours before they have to recharge again (and even less if they’re using it all day long).

Won’t Connect to Alexa

The iFamily Baby Monitor is supposed to be compatible with Amazon Alexa devices such as the Echo Dot and Echo Show.

Unfortunately, this doesn’t always work as expected. Some users have reported that their monitors won’t connect at all or will only connect intermittently.

There have also been complaints about poor sound quality when using an Alexa device for two-way communication between parent and child.

This is because the iFamily monitor uses a 2.4 GHz frequency rather than the 2.5 GHz frequency used by most Wi-Fi networks and routers.

You can remedy this by changing the IP address of your router or replacing it with one that supports 2.5 GHz frequencies instead of 2.4 GHz ones (this is usually not necessary).

Check this blog out about 7 problems with Nanit baby monitors.

Not Loud Enough

Another major complaint about this monitor is that it isn’t loud enough when set on high volume settings.

Many parents complain that they can barely hear their baby through their monitor even when they’re listening in another room or downstairs in their home.

This can be an issue if your child is sleeping or playing quietly in another room and you need to hear them clearly so you can respond immediately if necessary (for example, if they start crying).

Wi-Fi Set Up Is Confusing

The iFamily baby monitor has a lot of great features, but setting it up with your router can be confusing at times.

If you’re not technical, this could be an issue for you because the instructions are not very clear.

The good news is that once it’s set up, it works very well.

No Night Light Feature

While many other monitors have night light features that allow you to see what’s going on in your child’s room without turning on bright lights, iFamily doesn’t offer this option — which means you’ll have to turn on your bedroom lights every time you need to check in on your little one at night.

Doesn’t Adjust Well to Low Light

Another common problem with this monitor is that it doesn’t adjust well when there isn’t enough light in your room at night or when there’s not enough light coming through the window during the day.

You can adjust the brightness on your phone or tablet, but that only helps so much if there’s no light source in the room where your baby sleeps.

There are some settings in the app that allow you to adjust brightness and contrast levels manually, but they don’t always work as intended.

This can make it hard for parents who want to use their phone as a nightlight or alarm clock while their child sleeps next door or in another room of the house.

How Do You Reset a iFamily Baby Monitor?

When your baby monitor stops working properly it may be due to a software glitch or one of your settings.

If your monitor doesn’t respond or you have other problems with it, you can reset it to factory settings.

To do this:

  • Press the reset button on the back of your monitor’s power supply and wait for the lights to stop flashing.
  • Then press and hold down the talk button until all three lights flash at once.
  • Release the button and wait for all three lights to flash again.
  • This will reset your monitor’s settings without deleting any stored video footage.

Read this blog of ours about 6 problems with Angelcare baby monitors.

Where Can You Get a Baby Monitor Repaired?

If your iFamily Baby Monitor is not working properly and you need to get it repaired, there are several places where you can take it for repair.

If you have an Apple Store near you, then you can take your device there for repair.

If not, then there are repair stores in most major cities and towns across the country where they specialize in repairing iFamily Baby Monitors.

A good place to start looking would be online since most of these places have websites where they list their services and prices.

If you have a problem with your iFamily baby monitor, there are two ways to fix it:

  1. Call the company directly. If it’s still under warranty (which it should be), they will send someone out to fix it for free or at least offer a discount. The only problem with this option is that if you are not completely satisfied with their service, you will have no other options.
  2. Find a repair shop near you that specializes in fixing electronics like phones and computers.

Why Is My Baby Monitor Saying No Signal?

If your baby monitor is saying no signal, you may have a problem with the signal strength of your camera.

The first thing to check is whether there’s a signal at all. If your camera has been out of range for too long, it may have automatically switched itself off. If this happens, simply press the on/off button on the back of your camera and wait for it to turn back on again.

You can also try moving your camera closer to the receiver (the device that sends and receives signals). If the image on your monitor still looks distorted or fuzzy, then it’s likely that there’s something wrong with the signal itself.

If this happens, try moving your camera further away from any wireless devices such as wireless routers or microwaves.

These devices can interfere with signals from a wireless baby monitor, causing them to stop working properly.

If you’ve tried all of the troubleshooting steps above and still can’t get a signal, there may be something wrong with your device.

Read this blog about 7 problems with Miku baby monitors.

Why Is My Baby Monitor Going Black?

If your iFamily Baby Monitor goes black, it could mean that your battery is low. This can happen if you’re not using the iFamily Monitor for extended periods of time and the battery drains completely.

You can avoid this by charging your monitor before using it again.

If this doesn’t solve the problem, try resetting your monitor by pressing and holding down its power button for at least 10 seconds until it turns off and then back on again.

If you continue to experience problems with your iFamily Baby Monitor going black, contact customer support for assistance with troubleshooting your device or replacing it if necessary.

Here are some tips to help you troubleshoot:

  • Make sure the battery is charged.
  • Try another power outlet.
  • Check the internet connection.
  • Try rebooting your router (a simple reboot may solve your issue).

How Long Do iFamily Baby Monitors Last?

The iFamily baby monitor has an average battery life of 6-8 hours using alkaline batteries (or 4-6 hours using rechargeable batteries).

You can also use the AC adapter if you want continuous power with your iFamily baby monitor.

As for the lifespan they can last anywhere between 3-5 years. The lifespan of your baby monitor depends on how well you take care of it, as well as the environment it’s exposed to.

We’ve read about customers who have had their iFamily monitors for more than 10 years. This is because they take good care of them and store them properly when not in use.


Like any other product, the iFamily baby monitor has both numerous strengths and some weaknesses. It will work well for the majority of users but there are some exceptions to that. Families must reevaluate their current needs and decide whether or not the iFamily baby monitor is right for them.

But with that all said, don’t completely write these baby monitors off. The iBaby M6 is a decent option for some, and works well enough with Apple products and smart TVs. Just be careful when buying from unauthorized retailers who may not give you the true picture of what you’re getting.

Read this blog about 8 problems with Family baby monitors.


Was this article helpful? Like Dislike

Click to share...

Did you find wrong information or was something missing?
We would love to hear your thoughts! (PS: We read ALL feedback)